Nothing is worse than sitting in a vehicle that’s stuck in park. The engine is running fine, but the shifter just won’t move. There are several things you can try to get your Mazda 6 moving now. These include checking to see if the parking brake is stuck, finding the shift lock solenoid override (if applicable), and the shift linkage.
Let’s get straight to it. We’ll start with things that are easy and quick to remedy (allowing you to get moving again). We’ll then move onto the less likely problems with the hope that you can get your 6 out of park fast.
Mazda 6 Stuck in Park Causes
Is it physically impossible to move the gear shift into any other position? Here are a few possibilities that could be causing the problem.
Parking Brake Stuck
Is your 6 parked on a hill? If so, then the force of gravity could be forcing your transmission to put pressure on the parking lock in the transmission.
If this is what happened to your 6, it is good news since it’s pretty easy to fix. This happens a lot when you don’t use a parking brake on a hill. It can happen to any vehicle, at any age or mileage. Getting it unstuck can be easy, but also a little dangerous since you’ll need to rock the vehicle. The best way to rock it is from the driver’s seat. Just throw your weight around. Proceed at your own risk.
What you’re going to need to do is safely:
- Turn the vehicle engine on.
- Rock the vehicle with your foot off the brake.
- Press the brake down when you have rocked toward the hill a bit. You want to “catch” it with the brake at the right time. This will take pressure off of the parking lock.
- Apply light pressure to the shifter. You don’t want to break the shift linkage.
Hopefully that worked. You want to get a little pressure off of the parking mechanism in the transmission. It’s not meant to be a brake. That’s why parking brakes aren’t called emergency brakes anymore. So if you do rock it, try and catch your 6 as it rolls behind you. When it’s about to rock forward again, hit the brakes and try to get it out of park. Easy right?
Shift Lock Solenoid Failure
The shift lock solenoid is the mechanism that keeps you from shifting out of park without your foot on the brake. The good news is that most shift locks have an override button. You will need to find it for your particular model year of 6 (if applicable).
Finding it is usually pretty easy. Just look at your shifter. There’ll be a little plastic cover, you pop it off and override the shifter lock solenoid. This can get you back on the road in a hurry and could save you from being stranded.
Here’s a video that’ll show you where to find them on most vehicles.
Bad Shift Linkage
The shift linkage on your 6 will usually provide a lifetime of dependable service. But, they can go bad.
If you are positive that the gear shifter is not stuck in park (see directly above), then it’s likely that the shift linkage may be bad. Either something caused it to bend, or it’s starting to come loose. If it’s come loose, the geometry won’t be right anymore and it may keep your 6 stuck in park.
Conclusion: 6 Stuck in Park
There aren’t a lot of issues that would cause your Mazda 6 to be stuck in park. Good luck working through the diagnosis. If there is anything that you would like to add, please feel free to leave a comment below.