P0521 is an OBD2 diagnostic code that is triggered when your Ford Ecosport detects that the value being sent from the oil pressure sensor is out of its normal operating range.
It is typically caused by a bad oil pressure sensor or an issue with the oil system, and should be diagnosed and fixed right away. While it is possible (and even likely) that the oil pressure sender/sensor is bad, there could also be a problem with the oil pressure.
Your Ecosport’s oil pressure sensor measures the oil pressure mechanically, and converts that reading into a voltage signal that the PCM (Powertrain Control Module) converts into an oil pressure reading. This reading is what you see on your oil pressure gauge and triggers the oil warning light.
Here are the most common symptoms of P0521: P0521 is going to be caused by an issue with the sensor or sensor wiring (which would mean your engine is fine). Or it is going to be caused by an issue your Ecosport’s oil level, viscosity, pressure, or cleanliness. Since proper oil flow is so critical to the engine, this code should be treated with respect and not ignored. Here are the most common causes of P0521: This P0521 diagnosis order is written (like everything on the site) for the DIY guy who doesn’t have a lot of specialty tools. The first thing that you should do is check the oil level. If it’s full make sure that it looks healthy. If it appears to be black or grimy, it may be interfering with the oil pressure sensor. Next, you should inspect the wiring harness running from the oil pressure sensor to the PCM. If it has any damaged wiring, that could be causing P0521. Don’t forget to make sure that the harness is still plugged into the sending unit and undamaged. Wiring issues are one of the more common reasons that this code is thrown. The wiring is close to the Ecosport’s exhaust and can get brittle over time. Assuming that the oil level and wiring look fine, the next thing to do would be to manually check the oil pressure. You can use a manual oil pressure gauge to see if it’s where it needs to be. They are easy to use. Here’s a great YouTube video that will show you exactly how to use this gauge to check. If the oil pressure from the gauge reads ok, you’ll need to replace the oil pressure sending unit/sensor. They’re cheap. If there is low or no oil pressure, you’ll need to figure out why. It’s relatively straightforward diagnosing P0521. Knowing the actual oil pressure level makes it a lot easier. Feel free to leave a comment below if there is something that you would like to add and good luck fixing your Ford Ecosport!P0521 Quick Facts
P0521 Symptoms: Ford Ecosport
Ecosport P0521 Causes
P0521 Diagnosis: Ford Ecosport
1. Check the Oil
2. Inspect the Wiring Harness
3. Manually Check The Oil Pressure
Conclusion